Logo SarnafilYour worldwide Partner for Roofing and Waterproofing Solutions
 News and KnowledgeAbout usWorldwideJobs
Deutsch PrintSearchContactSitemapHome
Visual
 Flat RoofPitched RoofWatermanagementPools and PondsSpecial Applications
 

Accessories Sarnafil G/S
Fasteners
Metal Accessories
Chem./Techn. Products
Roof Drainage G/S
Decor Profile
Walkway Pads
Prefabricated Parts
Mastics/Lacquer
Adhesives
Barrier and Levelling Layers
 
Flat Roof | Accessories Sarnafil G/S | Adhesives  


Sarnacol

Material, Use, Application Recommendations
Sarnacol is a family of adhesives based on synthetic rubber, polyurethane, or dispersion resin. All Sarnacol adhesives are designed especially for use in roofing. Each is specially suited to particular applications.
These application guidelines represent the best of our current knowledge; they apply without legal liability.
The application of Sarnacol must be adjusted to the conditions on each project site. Contact our specialists if you need technical support.


Flat Roof - Accessories Sarnacol Sarnacol 2170
Sarnacol 2170 is a contact adhesive used in the fully adhered application of Sarnafil G/S on bitumen-free, solvent-resistant substrates including:

  • Concrete, lightweight concrete, masonry, and plaster
  • Plywood and particle board
  • Polyurethane foam insulation board with glass fibre coating
  • Phenolic resin board with glass fibre coating
  • Mineral fibre insulation board, density at least 150 KN/m2
  • Polyester, rigid PVC, flexible PVC
  • Galvanized steel, PVC-clad metal flashing
Use in accordance with the product instructions.

For additional recommendations see the EU safety data sheet for this product.

Flat Roof - Accessories Sarnacol Sarnacol 2142S
Sarnacol 2142S is a polyurethane adhesive for adhering Sarnafil G/S with felt backing to old or sand-finished bitumen roofing and to most other common substrates. Use in accordance with the product instructions.

For additional recommendations see the EU safety data sheet for this product.


Flat Roof - Accessories Sarnacol Sarnacol 2121
Sarnacol 2121 is a dispersion adhesive for bonding to absorbent substrates with a maximum slope of 5°.

Use in accordance with the product instructions.

Sarnacol 2121 is not frost resistant and may be applied only during the warm half of the year.

Flat Roof - Accessories Sarnacol Sarnacol 2115
Sarnacol 2115 is used to apply a sand finish to Sarnafil G/S.

For additional recommendations see the product instructions and the EU safety data sheet for this product.

Flat Roof - Accessories Sarnacol Sarnacol 2116
Sarnacol 2116 is used to adhere and secure gravel ballast in exposed areas.

For additional recommendations see the product instructions and the EU safety data sheet for this product.

© 2004 Sarnafil International AG    Legal Disclaimer