| |
|
|
Sarnacol T 660, Solvent T 660
Material,
Use, Application Recommendations
Sarnacol
is a family of adhesives based on synthetic rubber, polyurethane, and dispersion resin. All Sarnacol
adhesives are designed especially for use in roofing. Each is specially suited to particular applications.
These
application guidelines represent the best of our current knowledge; they apply without legal liability.
The
application of Sarnacol must be adapted to the prevailing conditions on each project site. Contact our
specialists if you need technical support.
 |
 |
Sarnacol T 660
For
adhering Sarnafil T at terminations
and connections to:
- Concrete, lightweight concrete,
masonry, plaster
- Particleboard
and plywood
- Rigid polyurethane boards with glass fibre facing
- Galvanised
sheet metal, chrome steel, aluminium (degreased with
- Solvent
T 660)
- Sarnafil
T-clad metal flashing
- Rigid PVC
- Polyester
(requires heat activation)
Use in accordance with
the product instructions.
For additional recommendations see the EU
Safety Data Sheet for this product.
|
|
 |
|
Solvent T 660
Solvent
T 660 is used to remove adhesive residue from Sarnafil T membrane and to degrease sheet metal.
Solvent
T 660 can also be used to thin Sarnacol T 660..
Welding areas of Sarnafil
T treated
with Solvent T 660 must be treated with Sarnafil T Prep before welding.
For
more information refer to the EU Safety Data Sheet for this product.
|
|
 |
|
Sarnacol 2142 S
Sarnacol 2142 S
is a polyurethane adhesive for adhering Sarnafil G/S with felt backing to old or sand-finished bitumen
roofing and to most other common substrates.
Use in accordance with the
product instructions.
For
more information refer to the EU Safety Data Sheet for this product.
|
|
 |
|
Sarnacol 2116
Sarnacol
2116 is used to secure Verklebung bzw. gravel ballast in exposed areas.
For
more information refer to the EU Safety Data Sheet for this product.
|
|
|
|
© 2004 Sarnafil International AG Legal Disclaimer
|
|
