| |
|
|
Sarnafelt
 |
 |
Material and Use
Sarnafelt
A (300 g/m2)
Sarnafelt
M (500 g/m2)
Sarnafelt
S (800 g/m2)
These non-decaying
heat-set synthetic fibre mats are used as a levelling layer. Heavier gages are used for rougher surfaces.
Sarnafelt may not be exposed to moisture or weather.
Sarnafelt T is recommended
for use in mechanically fastened systems, because it is easier to penetrate.
|
|
 |
|
Sarnafelt GK (400 g/m2)
This
is a synthetic fibre mat with a PE coating on one side. Sarnafelt GK is used mainly as a protective
barrier and slip sheet beneath paving or poured cementitious toppings.
|
|
 |
|
Sarnafelt T (300 g/m2)
This is a UV-stable, non-decaying synthetic fibre mat used as a separation and levelling layer between Sarnafil T waterproofing and incompatible substrates. Sarnafelt T can also be used as a protective layer between Sarnafil T waterproofing membrane and any protective topping or paving.
Sarnafelt T is the only type of Sarnafelt that may be exposed to weather.
|
|
|
|
|
|
|
|
|
© 2004 Sarnafil International AG Legal Disclaimer
|
|
